Model predictive control of a current source inverter together with its current source

Cossutta, Pablo; Rivera, Marco; Valla, María Inés; Angélico Engelhardt, Mathias; Aguirre, Miguel Pablo

ponencia en congreso.page.titleprefix
Model predictive control of a current source inverter together with its current source

dc.contributor.author	Cossutta, Pablo
dc.contributor.author	Rivera, Marco
dc.contributor.author	Valla, María Inés
dc.contributor.author	Angélico Engelhardt, Mathias
dc.contributor.author	Aguirre, Miguel Pablo
dc.date.accessioned	2022-11-11T19:09:36Z
dc.date.available	2022-11-11T19:09:36Z
dc.date.issued	2016-10
dc.description.abstract	"Over the past years a great amount of research has been done to interconnect different energy sources with the power grid or different types of loads. Current source inverters have proved to be a good option due to its high reliability, fault tolerant capabilities, quasi soft switching and the use of lower capacitor values among others. Most of the current source inverters topologies have a current source as input, which could be implemented with a buck converter, and they are controlled with cascaded linear control (usually PI controller), rotating frame coordinate transformation and a modulation stage. In this paper a predictive control strategy of a current source inverter together with its associated current source is presented. This strategy allows to track not only the output voltages at the load but also the current source within a single controller. The control algorithm makes use of a discrete time model of the whole system so as to predict its future behaviour for each one of the available switching combinations. Each one of the predicted values are used to minimize a set of predefined control goals within a multiple term cost function that includes cost associated with the commutation frequency and the reference tracking. Simulation results show a good behaviour and fast dynamics with a low switching frequency of all the switches involved. These characteristics make the proposed controller a suitable option to use with high power inverters."	en
dc.identifier.uri	https://ri.itba.edu.ar/handle/123456789/3993
dc.language.iso	en	en
dc.relation	info:eu-repo/semantics/altIdentifier/doi/10.1109/IECON.2016.7793499
dc.subject	SISTEMAS DE CONTROL	es
dc.subject	CONMUTACION	es
dc.subject	CONVERTIDORES DE POTENCIA	es
dc.subject	CONTROL PREDICTIVO	es
dc.title	Model predictive control of a current source inverter together with its current source	en
dc.type	Ponencias en Congresos	es
dc.type	info:eu-repo/semantics/acceptedVersion
dspace.entity.type	Ponencia en Congreso
itba.description.filiation	Fil: Cossuta, Pablo. Instituto Tecnológico de Buenos Aires; Argentina.
itba.description.filiation	Fil: Angélico Engelhardt. Mathias. Instituto Tecnológico de Buenos Aires; Argentina.
itba.description.filiation	Fil: Aguirre, Miguel Pablo. Instituto Tecnológico de Buenos Aires; Argentina.
itba.description.filiation	Fil: Rivera, Marco. Universidad de Talca; Chile.
itba.description.filiation	Fil: Valla, María Inés. Universidad Nacional de La Plata; Argentina.